CT Scanner
GE LightSpeed QXI/PLUS/16

The GE LightSpeed is a third generation multi-slice helical CT scanner featuring a 53 kW generator, 6.3 MHU tube and a fast gantry rotation time of 0.5 seconds. The LightSpeed 16 is capable of imaging 16 slices per rotation, while the LightSpeed Ultra is capable of imaging eight slices per rotation.

CT Scanner
Toshiba Aquilion 64 Slice

The Toshiba Aquilion 64 Slice whole body CT scanner is built on the unique 64 row Quantam Detector and designed to provide optimal performance and image quality. It is known as the world’s only true volumetric 64 slice CT scanner with 64 detector channels, 3D cone beam algorithms, and volume reconstruction.

Disposable Pressure Transducer Sets

Consistent and accurate readings during monitoring. Ease of use. With a variety of interface cables available, the pressure transducer can be connected to most types of monitors. Fully integrated flow thru component design simplifies filling and debubbling. Versatile, dual function Snap-Tab allows dynamic response testing.

Electro - Hydraulic Operating Table
Multifunctional Mastertec 15 Eletro-Hydraulic

APPLICATION The Mastertec 15 Electro Hydraulic Operating Table was developed based on a Multifunctional concept. Built to respond to surgeries in minor, medium and major terms. It allows the surgeon to have the best position towards the patient based on the intervention required. Regulated by NBR IEC 60601-2-46. Brazilian Health Department registration: 10250260011 CE Certification Soft and precise movements performed by a wired remote control or on the panel located on the table base which is protected against radiofrequency interference. The head section has manual regulation; push the lever on the central base to move the head section. The leg sections are horizontally movable and completely released by easily using the maniples. The equipment has a safety system that locks the wheels, while the table top is being used in any other position than the zero one. On the lowest position, the wheels are unlocked allowing the equipment movement. The table top is radio translucid perfect for the use of x-rays and C-arm. An optional accessory allows the use of an X-ray support to take x-rays during the surgery to ease in a way that is not necessary to move the patient in order to place the x-ray plate on the head section table’s lateral. When the X-ray is necessary on the seat section, the accessory Extension Table Pad allows it to place the patient into an x-ray area to perform surgeries on the inferior or superior members. The Mastertec 15 batteries are sealed to avoid production of gas in the operating room. Strong structure, the column is made of steel with hard chromo, the base, the elevator, and seat section are covered with stainless steel (Chromium nickel steel) The articulations (legs and back), side rails and table top lateral plates are also made of stainless steel (Chromium nickel steel) MOVEMENTS/ANGLES/POSITIONS Head up/down 0°-30°/0°-90° Leg up/down 0°-35°/0°-70° Lateral-left/right 0°-20°/0°-20° Back up/down 0°-65°/0°-30° Trendelemburg/reverse 0°-20°/0°-20° Abdominal Flexion Semi-sited Lithotomic Horizontal Abdominal Extension Thyroid Operation Semi-flexion of legs and tight Leg Inversion Leg Rotation OPTIONAL ACESSORIES Extension Table Pad Cassette Holder X- ray Tray Instrument Carrier Lateral Decubitus Femur Traction Obstetric Attachment Urological/RTU Attachment X- Ray Lateral support Neuro Adaptor Transferitec Shin Traction Body Strap Wristlet Accessories Trolley Tight Support Hand Traction Shoulder Surgery Attachment Smaller Head Support Infusion Stand Kidney Elevator TECHNICAL INFORMATION Maximum Height [mm]1.010 Frequency [Hz] 50/60 Net Weight [kg] 245 Minimum Height [mm]810 Potency [W]400 Noise Level [dBA]72 Table Top thickness [mm] 2.080 x 610 Emergency System 03 bat 12 v/ 7 a Power Tension [V]220 Length/ Width [mm]50 Wheels Diameter [pol]03 - 05 Remote Control [unity]01 Maximum Height [mm]1.020 x 590 Load Capacity [kg] 350

General Electric OEC 7900 Fluorostar - C-Arm
OEC 7900 Fluorostar

9 inches image intensifier Sony UP970 video & USB 512x512 matrix image laser AIM Dual monitors Available NOW Installed in May 2009

Incubator
Drager Caleo

The Drager Caleo incubator provides an ideal microenvironment for neonates by delivering advanced thermoregulation parameters. It offers ease of use, intelligent accessibility, and the nurturing power of developmental care- bringing practical benefits to infants, caregivers and parents.

Mammography System
2010 Hologic Dimensions 3D with / TOMO & Affirm

The Hologic Selenia Dimensions 3D provides exceptionally sharp images, seamless transition between imaging modes, sophisticated user tools that simplify operation and advanced clinical applications. The 2010 Hologic Dimensions 3D with / TOMO & Affirm comes with the 2013 detector, software version 1.8 and accessories which include complete set of paddles, acrylic phantom, mag stand, tomo face shield, geometry phantom, two sets of foot pedals, manuals, and mapping array disk.

Mammography System
2012 Hologic Dimensions 3D with / TOMO

The Hologic Dimensions 3D with / TOMO offers the benchmark Hologic customers expect, with essential ergonomics and functional workflow features, as well as the Genius 3D Mammography exam, at an attractive price. The 2012 Hologic Dimensions 3D with / TOMO omes with the original detector, software version 1.8 and accessories which include complete set of paddles, acrylic phantom, mag stand, tomo face shield, geometry phantom, two sets of foot pedals, manuals, and mapping array disk.