Belimed

Belimed

Belimed is a global supplier of cleaning, disinfection and sterilization solutions for Medical and Life Science to customers ranging from multinational pharmaceutical manufacturers to hospitals and large medical practices. It delivers standard machines, large-scale systems planned and realized specifically for the custome ...
Products

Recently updated

Multi-Chamber Washer-Disinfector
WD 390

The Belimed WD 390 is a fully automated multi-chamber washer-disinfector designed for high throughput and efficient workflow in reprocessing environments. Available in 3- or 4-chamber configurations with optional ultrasonic module, it features stainless steel wash pumps with pressure monitoring, dual high-performance drying units, and H14 sterile filtration. Its intuitive interface, illuminated chamber, and patented status display enhance usability, while compliance with EN ISO 15883-1 and -2 ensures reliable, standardized cleaning and disinfection.
More details

Washer/Disinfector
WD 290

The WD 290 washer/disinfector uses a soaking, penetrating wash process that effectively delivers water and detergent to all surfaces and hard-to-reach areas. Its door design eliminates friction on the seal, reducing the potential for leaks, while its large capacity-to-footprint ratios free up valuable floor space.
More details

Single Chamber Ultrasonic - Wash / Rinse
565 PLUS Series

The 565 PLUS Ultrasonics are easy-to-use systems for cleaning and rinsing a variety of instruments - from heavy orthopedic sets to cannulated instruments and daVinci® Endowrists. With high throughput and ergonomic loading heights, the PLUS series is ideal for a large CSSD.
More details

Hospital Infrastructure

Cart Washer
CS 750

The CS 750 cart washer is optimized to clean and dry case carts, containers and basins as effectively and as fast as possible, ensuring that sterile processing departments stay ahead of demands. It has a full cycle, including wash, rinse and complete dry, in only six minutes and a tank wash system with rinse water recycle that reduces water use to about eight gallons per cycle.
More details

Steam Sterilizer
CA 9600 Series

The CA 9600 Series carriage loading steam sterilizer is designed around the basic principles of workflow improvement, maximizing resource efficiency, and lowering operating costs. Available in three high capacity sizes ranging from 16 trays to 24 trays, it is ideal for sterile processing departments requiring large capacity systems for maximum throughput.
More details

Washer Disinfector
WD 290 IQ

The WD 290 IQ is a single chamber washer with a high volume water flow and lower pressure, providing a better way to clean while using very little water and resources. It features two large, intuitive, 10.4-inch touchscreens for independent operation and interface, along with a patented process display which gives a quick visible cycle status.
More details

Medical Cleaning & Sterilization Solutions
Protect

The Protect line of proprietary cleaning solutions is specially formulated for all steps of the decontamination process and protects patients, staff and the environment. The cost-effective medical cleaning and sterilization solutions have been specially formulated to boost the cleaning power in Belimed’s low impingement washer/disinfectors.
More details

Instrument/Cart Washer
WD 750

The WD 750 large scale instrument washer/cart washer offers a full instrument cycle with A0 3000 disinfection in less than an hour and has the highest throughput of any instrument washer at 48 trays per cycle. It meets the stringent washing requirements of ISO 15883 and is not limited to simple instruments such as forceps and clamps.
More details

Surgery

Multi-Chamber Washer-Disinfector
WD 390

The Belimed WD 390 is a fully automated multi-chamber washer-disinfector designed for high throughput and efficient workflow in reprocessing environments. Available in 3- or 4-chamber configurations with optional ultrasonic module, it features stainless steel wash pumps with pressure monitoring, dual high-performance drying units, and H14 sterile filtration. Its intuitive interface, illuminated chamber, and patented status display enhance usability, while compliance with EN ISO 15883-1 and -2 ensures reliable, standardized cleaning and disinfection.
More details

Washer/Disinfector
WD 290

The WD 290 washer/disinfector uses a soaking, penetrating wash process that effectively delivers water and detergent to all surfaces and hard-to-reach areas. Its door design eliminates friction on the seal, reducing the potential for leaks, while its large capacity-to-footprint ratios free up valuable floor space.
More details

Single Chamber Ultrasonic - Wash / Rinse
565 PLUS Series

The 565 PLUS Ultrasonics are easy-to-use systems for cleaning and rinsing a variety of instruments - from heavy orthopedic sets to cannulated instruments and daVinci® Endowrists. With high throughput and ergonomic loading heights, the PLUS series is ideal for a large CSSD.
More details

Steam Sterilizer
MST-H 9600 Series

The MST-H 9600 Series of carriage-loading steam sterilizers offer process efficiency and resource conservation most suitable for high reprocessing volumes. These sterilizers offer maximized throughput with flexible manual or automated loading solutions and integrated clean steam generation options.
More details

Washer-Disinfector
WD 200

The WD 200 is a space-saving, fast, reliable and easy to operate washer-disinfector with illuminated chamber and manual hinged glass doors to eliminate the need for carts, a benefit in tight spaces. With no lateral maintenance room needed, the low-consumption WD 200 processes 12 DIN trays and has the smallest footprint at 68 cm width with front direct service access to adjust to space constraints.
More details

Steam Sterilizer
MST-H

The MST-H steam sterilizers with horizontal sliding doors achieve high throughput, resource efficiency and cost effectiveness. It uses advanced process technology for reduced water consumption and fast cycles and has extended door seal life systems due to high precision milled sealing slot.
More details

Washer-Disinfector
WD 430

The WD 430 washer-disinfector is designed for high performance cleaning with simultaneous reprocessing of flexible endoscopes from different manufacturers. It features a highly effective single channel control system with constant control of all channels, including Jet- and Albarran-channel.
More details

Washer-Disinfector
WD 425

The WD 425 washer-disinfector has been developed for reprocessing flexible and rigid endoscopes as well as medical instruments. It can undertake simultaneous reprocessing of three flexible endoscopes, all contained in a compact under table or freestanding full-glass, high-visibility door system.
More details

Clinical Laboratory

Multi-Chamber Washer-Disinfector
WD 390

The Belimed WD 390 is a fully automated multi-chamber washer-disinfector designed for high throughput and efficient workflow in reprocessing environments. Available in 3- or 4-chamber configurations with optional ultrasonic module, it features stainless steel wash pumps with pressure monitoring, dual high-performance drying units, and H14 sterile filtration. Its intuitive interface, illuminated chamber, and patented status display enhance usability, while compliance with EN ISO 15883-1 and -2 ensures reliable, standardized cleaning and disinfection.
More details

Washer-Disinfector
WD 200

The WD 200 is a space-saving, fast, reliable and easy to operate washer-disinfector with illuminated chamber and manual hinged glass doors to eliminate the need for carts, a benefit in tight spaces. With no lateral maintenance room needed, the low-consumption WD 200 processes 12 DIN trays and has the smallest footprint at 68 cm width with front direct service access to adjust to space constraints.
More details

Single Chamber Washer
WD 250

The WD 250 single chamber washer uses the soaking, penetrating wash process to effectively deliver water and detergent to all surfaces and hard-to-reach areas. Its door design eliminates friction on the seal, reducing the potential for leaks, while its large capacity to footprint ratios free up valuable floor space.
More details

Ultrasonic Washer
Ultrasonic Washers

BELIMED’s Ultrasonic Washers are robust and easy to use, combining effective cleaning with clinician-friendly design and featuring a separate instrument rinsing and drying chamber. It features back-friendly automatic tray elevators and lid lifts along with a 35 pound basket capacity per chamber for cleaning even the heaviest loads.
More details

Steam Sterilizer
MST V 600 Series

The MST V 600 Series of steam sterilizers is optimized for throughput and workflow efficiency and can be installed side-by-side, with no side or rear service access required. With a capacity of up to 12 standard trays, a width of less than 40 inches, and options for fully integrated steam generators, they are ideal for ORs, surgical centers, and sterile processing departments.
More details

Instrument/Cart Washer
WD 750

The WD 750 large scale instrument washer/cart washer offers a full instrument cycle with A0 3000 disinfection in less than an hour and has the highest throughput of any instrument washer at 48 trays per cycle. It meets the stringent washing requirements of ISO 15883 and is not limited to simple instruments such as forceps and clamps.
More details

Steam Sterilizers
GR 9600 Series

The GR 9600 Series of steam sterilizers are designed around the basic principles of workflow improvement, maximizing resource efficiency, and lowering operating costs. Available in sizes ranging from 40 cubic feet (1138 L) to 57 cubic feet (1625 L), they help meet a variety of volume requirements.
More details
Copyright © 2000-2026 TradeMed.com. All rights reserved. | Terms And Conditions